Garrett Boost | Club Line GBC22-350 44MM

Horsepower: 200 - 350 Displacement: 1.0L - 2.5L

Features:

Club Line is a product engineered for small engine displacements. This includes powersports, personal watercraft, and automobiles. These turbochargers feature internally wastegated turbine housings and journal bearing rotating groups. GBC stands for GARRETT BOOST | CLUB LINE. The first two numbers indicate the turbo frame size. The larger the number the larger the turbine wheel. The numbers following the dash indicate the peak potential flywheel horsepower rating. GBC22-350

 

  • 44mm compressor inducer | 56mm compressor exducer
  • Outline interchangeable with GBC 17 / 20
  • 200-350 horsepower capability
  • Integrated wastegate assembly with calibrated actuator
  • Billet compressor wheel with extended tip design for higher pressure ratio capability
  • GTX Gen II compressor aero with modern gasoline turbine wheel aero
  • Supports up to 350 horsepower
  • Forged Fully-Machined Compressor Wheel
  • Journal Bearing Rotating Group
  • Internally wastegated turbine housing
  • Engineered for small displacement engines including powersports, personal watercraft and automobiles

 

Read About Turbo System Optimization: A guide to setting up your turbocharger

 

The maximum power stated for each turbocharger has been calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel power. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. Please consult with your local distributor before making a purchase.

Compressor Aero:

Forged, fully-machined compressor wheels with advanced aero is offered in 44mm inducer size and 56mm exducer. GBC22-350 can support from 200-350 horsepower. The compressor wheel is a 62 trim and the Compressor housing A/R is 0.59 A/R. This turbocharger can support up to 37 lbs/min of airflow and up to 3.5 pressure ratio.

 

Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The target power represented has been calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel power.

 

Journal Bearing Rotating Group:

The oil cooled center housing features the latest generation of journal bearing rotor group.

 

Internally Wastegated:

Club Line turbochargers are fully assembled with an internally wastegated turbine housing. Garrett’s technicians calibrate the actuator for optimum performance, eliminating any need for adjustment. Club Line turbochargers are calibrated with a 0.5 bar actuator. Actuators with higher pressure settings (1.0, 1.5 bar) are available for individual purchase.

 

Turbine Housing:

The GBC20-300 turbine housing inlet flange is standard T25 spec, and the outlet features a 5 bolt pattern. The 5 bolt outlet pattern is the same flange as the GT25 / GT28 turbos.

 

 

SKU 896055-5003S
Brand Garrett
Shipping Weight 8.0000kg

Be The First To Review This Product!

Help other JDM Mods NQ users shop smarter by writing reviews for products you have purchased.

Write a product review