Raceworks have developed a comprehensive range of performance fuel injectors, that now set the industry standard for quality and reliability, with a variety of flow rates, physical sizes and fuel compatibility ranging from pump fuel to E85 and Methanol. A full range of connector plug adaptors and extensions are also availalbe, enabling a quick and simple upgrade to almost any application. All Raceworks injectors are High Impedence with 14mm Viton O-Rings.
Modified/High Flowed Bosch Injector
Size: 1100cc ( 105 Lb/hr) @ 3bar and 1300cc (124 Lb/hr) @ 4bar.
Impedance: High (12 Ohms)
Plug: USCAR. Top O-Ring: 14mm. Bottom O-Ring: 15mm.
Ethanol & Methanol Safe
Spray Pattern – Narrow Cone
Spray Direction – Straight
Sold flow matched to a +/- 1% Variance (2% Total)
Flywheel power figures per injector (Estimated):
Normally Aspirated Gasoline 220HP 165KW
Forced Inducted Low Boost Gasoline 180HP 135KW
Forced Inducted High Boost Gasoline 195HP 145KW
Normally Aspirated E85 165HP 125KW
Forced Inducted Low Boost E85 130HP 95KW
Forced Inducted High Boost E85 140HP 105KW
Direct fit applications*:
Holden Commodore VZ 6.0L V8
Holden Commodore VE L76/L77/L98/LS3
Holden Commodore VE LS7
Holden Commodore VF V8
*Injectors are a direct fit physically, but as with all Raceworks Injectors, will require a tune. While the vehicles listed above are direct fit, the injector can be used in many other applications with the appropriate extensions, o-rings or plug adapters.