Raceworks Billet inline filters contain a total filtration surface area of 374 square centimetres. The filters are directional and washable, and suitable for high horsepower applications, supporting up to 2400LPH @ 3Bar. See below for more detailed flow ratings.
Raceworks Inline Fuel Filters constitute the core of any high performance EFI installation, affording both precise levels of filtration and high volumes of flow.
Replacement element varieties are available in 10, 40, 75, and 100 micron stainless steel, along with barbed filters with bronze elements, both allowing for pre and post-pump filtration without impeding flow rates.
All elements are E85 safe, with a total filtration surface area of up to 374 square centimetres. Filter bodies are hard coat anodised in gloss black, with matching brackets available to match your in-car or under-car setup.
All Raceworks products come with a 2 year warranty.
Stainless lifetime elements and E85 Safe
AN-10 ORB. 50mm DIA. 140mm Long
Which Micron level is suitable?
The lower the micron level, the finer the particle it filters, but the more restrictive the filter is on flow. Raceworks recommended a 100 or 75micron filter for use pre-pump, and a 40 or 10micron filter for use post-pump (Pre injectors).
Micron Maximum Flow Rating @ 3Bar* Part Number
10 1500LPH ALY-077-10BK
40 1800LPH ALY-077-40BK
75 2100LPH ALY-077-75BK
100 2400LPH ALY-077-100BK
*Maximum flow rate measured with a pressure drop across the filter of 2psi
Additional Products to Suit:
10 Micron – ALY-082-10
40 Micron – ALY-082-40
75 Micron – ALY-082-75
100 Micron – ALY-082-100